Video: http://kelly-arch497.blogspot.com/

CIRCUIT DIAGRAM:

WIRING DIAGRAM: 
 

PHOTOS:

VIDEO:

http://kelly-arch497.blogspot.com/

CODE: /*Go, Slow, Stop repition seter
*
*Turns on go light, switches to slow and then the stop light.
*A light turns on everytime it goes throught the sequence to indicate
*how many times the cycle has gone through
*There is also a light to set the seconds
*/int golight = 12; // LED connected to digital pin 0 is go light
int slowlight = 11; // LED connected to digital pin 1 is slow light
int stoplight = 10; // LED connected to digital pin 2 is stop light
int Aset = 0; // LED connected to digital pin 3 indicates 1 repitition
int Bset = 1; // LED connected to digital pin 4 indicates 2 repititions
int Cset = 2; // LED connected to digital pin 5 indicates 3 repititions
int Dset = 3; // LED connected to digital pin 6 indicates 4 repititions
int Eset = 4; // LED connected to digital pin 7 indicates 5 repititions
int Fset = 5; // LED connected to digital pin 8 indicates 6 repititions
int Gset = 6; // LED connected to digital pin 9 indicates 7 repititions
int Hset = 7; // LED connected to digital pin 10 indicates 8 repititions
int Iset = 8; // LED connected to digital pin 11 indicates 9 repititions
int Jset = 9; // LED connected to digital pin 12 indicates 10 repititions
int timer = 13; // LED connected to digital pin 13 blinks every second void setup() // run once, when the sketch starts
{
pinMode(golight, OUTPUT); // sets the digital pin as output
pinMode(slowlight, OUTPUT);
pinMode(stoplight, OUTPUT);
pinMode(Aset, OUTPUT);
pinMode(Bset, OUTPUT);
pinMode(Cset, OUTPUT);
pinMode(Dset, OUTPUT);
pinMode(Eset, OUTPUT);
pinMode(Fset, OUTPUT);
pinMode(Gset, OUTPUT);
pinMode(Hset, OUTPUT);
pinMode(Iset, OUTPUT);
pinMode(Jset, OUTPUT);
pinMode(timer, OUTPUT);
}void loop() // run over and over again
{
digitalWrite(golight, HIGH); // SET 1 GO
digitalWrite(slowlight, LOW);
digitalWrite(stoplight, LOW);
digitalWrite(Aset, HIGH);
digitalWrite(Bset, HIGH);
digitalWrite(Cset, HIGH);
digitalWrite(Dset, HIGH);
digitalWrite(Eset, LOW);
digitalWrite(Fset, LOW);
digitalWrite(Gset, LOW);
digitalWrite(Hset, LOW);
digitalWrite(Iset, LOW);
digitalWrite(Jset, LOW);
digitalWrite(timer, HIGH);
delay(1000);
digitalWrite(golight, HIGH);
digitalWrite(slowlight, LOW);
digitalWrite(stoplight, LOW);
digitalWrite(Aset, HIGH);
digitalWrite(Bset, HIGH);
digitalWrite(Cset, HIGH);
digitalWrite(Dset, HIGH);
digitalWrite(Eset, LOW);
digitalWrite(Fset, LOW);
digitalWrite(Gset, LOW);
digitalWrite(Hset, LOW);
digitalWrite(Iset, LOW);
digitalWrite(Jset, LOW);
digitalWrite(timer, LOW);
delay(1000);
digitalWrite(golight, LOW); // SET 1 SLOW
digitalWrite(slowlight, HIGH);
digitalWrite(stoplight, LOW);
digitalWrite(Aset, LOW);
digitalWrite(Bset, LOW);
digitalWrite(Cset, LOW);
digitalWrite(Dset, LOW);
digitalWrite(Eset, HIGH);
digitalWrite(Fset, HIGH);
digitalWrite(Gset, HIGH);
digitalWrite(Hset, HIGH);
digitalWrite(Iset, LOW);
digitalWrite(Jset, LOW);
digitalWrite(timer, HIGH);
delay(1000);
digitalWrite(golight, LOW);
digitalWrite(slowlight, HIGH);
digitalWrite(stoplight, LOW);
digitalWrite(Aset, LOW);
digitalWrite(Bset, LOW);
digitalWrite(Cset, LOW);
digitalWrite(Dset, LOW);
digitalWrite(Eset, HIGH);
digitalWrite(Fset, HIGH);
digitalWrite(Gset, HIGH);
digitalWrite(Hset, HIGH);
digitalWrite(Iset, LOW);
digitalWrite(Jset, LOW);
digitalWrite(timer, LOW);
delay(1000);
digitalWrite(golight, LOW); // SET 1 STOP
digitalWrite(slowlight, LOW);
digitalWrite(stoplight, HIGH);
digitalWrite(Aset, LOW);
digitalWrite(Bset, LOW);
digitalWrite(Cset, LOW);
digitalWrite(Dset, LOW);
digitalWrite(Eset, LOW);
digitalWrite(Fset, LOW);
digitalWrite(Gset, LOW);
digitalWrite(Hset, LOW);
digitalWrite(Iset, HIGH);
digitalWrite(Jset, HIGH);
digitalWrite(timer, HIGH);
delay(1000);
digitalWrite(golight, LOW);
digitalWrite(slowlight, LOW);
digitalWrite(stoplight, HIGH);
digitalWrite(Aset, LOW);
digitalWrite(Bset, LOW);
digitalWrite(Cset, LOW);
digitalWrite(Dset, LOW);
digitalWrite(Eset, LOW);
digitalWrite(Fset, LOW);
digitalWrite(Gset, LOW);
digitalWrite(Hset, LOW);
digitalWrite(Iset, HIGH);
digitalWrite(Jset, HIGH);
digitalWrite(timer, HIGH);
delay(1000);
}